10.Identify the Left and Right Upper Body Arms (84, 85).
Make sure that the Left Upper Body Arm (84) is positioned as shown. Attach the Left Upper Body Arm to the Left Upright (66) with two 1/4" x 3 1/2" Screws (56), two 1/4" Star Washers (23), and two 3/8" Star Washers (3) as shown. Do not overtighten the Screws.
Attach the Right Upper Body Arm (85) as described above.
11.Attach the Latch Housing (67) with the Latch Spacer (82) to the Left Upright (66) with two #10 x 1 1/2" Screws (8); make sure that the knob is on the indicated side. Start both Screws, and then tighten them. Be careful not to over- tighten the Screws.
10 |
|
|
66 | 84 |
|
23 | 3 |
|
|
| 85 |
56 |
|
|
| 23 | 3 |
| 56 |
|
11 |
|
|
| 82 |
|
| 67 |
|
Knob |
|
|
8 | 66 |
|
12.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 21 and 22).
12
