ASSEMBLY
• To watch an assembly video, go to http://productvideo.co/ assembly/kmart/weslo or use your mobile phone or smartphone to read the QR code at the right. A reader applica- tion such as ShopSavvy
must be installed on your mobile phone or smartphone.
•To hire an authorized service technician to assemble your exercise equipment, call
•Assembly requires two persons.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.
•After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild,
•Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.”
•To identify small parts, see page 6.
•Assembly requires the following tools:
the included hex keys
one Phillips screwdriver
scissors
To avoid damaging parts, do not use power tools.
1. Make sure that the power cord is unplugged. | 1 |
| |
Remove and discard the two screws (A) and the |
|
shipping bracket (B) from the right side of the |
|
Base (74). Then, remove and discard the screws |
|
and shipping bracket (not shown) from the left |
|
side of the Base. | B |
| A |
| 74 |
7
