2.Raise the Left Upright (11) and the Right Upright (10) to the position shown.
3.Attach the Hood (13) to the front of the Frame (14) with two M5 x 10mm Screws (4).
4.Hold the front of the Frame (14) between the Left Upright (11) and the Right Upright (10). Align the holes near the front of the Frame with the upper holes shown in the Uprights. Tighten an M12 x 40mm Screw (5) with an M12 Washer (6) into each Upright and into the Frame.
2 |
|
| |
| 11 | 10 | |
3 | 4 |
| |
| 13 | ||
|
| ||
|
| 14 | |
|
| 4 | |
4a |
|
| |
5 |
| 11 | |
6 | 10 | ||
| |||
|
| 14 | |
|
| 6 | |
|
| 5 |
8
