ASSEMBLY

 

 

 

 

 

 

 

 

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Do not remove the long wire is inside the Right

Handrail until told to. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.

During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping car-

ton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the

lubricant with a soft cloth and a mild, non-abrasive cleaner.

 

 

 

, adjustable

Assembly requires the included hex key

.

and your own Phillips screwdriver

wrench

, and wire cutters

 

 

 

 

 

 

 

Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of

this manual. Some parts may be preassembled. To avoid damaging plastic parts, do not use power tools

for assembly.

 

 

 

 

 

 

 

 

 

1. Attach the six Base Pads (19) to the bottom of the Base

1

 

 

 

 

 

(71) with six Base Pad Screws (42). Note: The Base

42

71

42

 

 

Pads may be preassembled.

 

 

 

 

4219

 

!

 

 

 

19

 

19

 

 

!

 

 

 

42

4219

 

 

 

 

 

 

 

19

 

 

 

2. Have a second person hold the Base (71) in the position

2

30

 

 

 

 

shown.

 

 

 

 

17

 

 

Identify the Right Handrail (6) which has a large hole near

 

12

 

 

 

the lower end.

 

 

 

 

 

 

 

3017

Hold the Right Handrail (6) so that the bend is in the

 

 

 

Large

12

position shown. Insert two Handrail Bolts (12) into the

 

 

 

 

bracket on the Right Handrail. Attach the Right Handrail

 

 

 

Hole

 

 

to the Base (71) with the Handrail Bolts, two Handrail

 

7

 

 

 

30

Washers (30) and two Nuts (17). Do not tighten the

 

 

 

 

Nuts yet.

 

 

 

 

 

6

 

 

 

Attach the Left Handrail (7) to the Base (71) in the same

 

 

71

 

way.

 

 

 

 

Bend

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

Page 6
Image 6
Weslo WMTL19408 user manual Assembly