West Bend SINGLE SERVE COFFEEMAKER Tea Brewing - Bags, Tea Brewing - Loose, Oatmeal

Models: SINGLE SERVE COFFEEMAKER

1 24
Download 24 pages 52.86 Kb
Page 5
Image 5

A small amount of smoke and/or odor may occur upon heating due to the release of manufacturing oils – this is normal.

Some minor expansion/contraction sounds may occur during heating and cooling – this is normal.

POD COFFEE BREWING – Any standard single serve Pod will work.

Using the Pod/Filter Holder, Place one or two pods (to taste) into the Pod/Filter Holder. Pack the Pod(s) tight to the bottom of the holder. Using the desired cup size as your measure (maximum 12 oz.), add cold water to the Server reservoir. Set your cup in place on Server and press the Start button. Brewing will complete in approximately 2-3 minutes.

GROUND COFFEE BREWING - Use standard drip grind coffee.

Place the Permanent Filter into the Pod/Filter Holder and position into the Server. Using the coffee measure, add a heaping measure of grounds into the filter. Using the desired cup size as your measure (maximum 12 oz.), add cold water to the Server reservoir. Set your cup in place on Server and press the Start button. Brewing will complete in approximately 2-3 minutes. Note: Adjust the amount of grounds to taste.

TEA BREWING – BAGS

Place one tea bag into your cup and set in place on Server. Add ¾-cup (6 oz.) of cold water to Server. Press the Start button. When brewing is complete (approximately 2 minutes), allow to steep for three minutes or to taste. Note: Adjust the amount of water to taste.

TEA BREWING – LOOSE

Place the Permanent Filter into the Pod/Filter Holder and position into the Server. Using the coffee measure, add a heaping measure of loose tea into the filter. Using the desired cup size as your measure (maximum 12 oz.), add cold water to the Server reservoir. Set your cup in place on Server and press the Start button. Brewing will complete in approximately 2-3 minutes. Note: Adjust the amount of loose tea to taste.

OATMEAL

Place contents of one single serve instant oatmeal package (approximately 1½ oz. or 43g), into 12 oz. cup and set in place on Server. Add ½-cup (4 oz.) of cold water to Server reservoir. Press the Start button. When brewing is complete (approximately 2 minutes), stir contents to desired consistency and allow to steep for an additional 1 or 2 minutes. Add sugar and/or milk if desired. Note: If using bulk packaged instant oatmeal, use ½ cups of oats and 1-cup (8 oz.) of water. Adjust the amount of water to taste and desired consistency.

5

Page 5
Image 5
West Bend SINGLE SERVE COFFEEMAKER instruction manual Tea Brewing - Bags, Tea Brewing - Loose, Oatmeal