MY BOOK
USER MANUAL
LOCKING AND UNLOCKING THE DRIVE – 47
4. Click the I understand check box to signify that you accept the risk.
5. Type your password in the Choose a password box, using up to 25 characters.
6. Retype your password in the Verify password box.
7. Type a hint to help remember your password in the Password hint box.
8. Select the Enable auto unlock for user: check box if you want the WD Security
software to remember your password for the selected drive on this computer.
9. Click Save Security Settings to save your pa ssword and enable hard ware
encryption for your drive.
10. Click OK to close the Security has been enabled message.
Unlocking the Drive
After you have created a password to keep others from accessing the files on your drive,
unless you selected the Enable auto unlock for user: check box, you will have to type
your password to unlock the drive whenever:
• You shut down and restart your computer
• You disconnect and reconnect the drive to your computer
• Your computer exits the sleep mode
You will have to do this even if you do not have the WD Security software installed on
your computer.
Depending on the software configuration of your computer, there are three ways to
unlock the drive, using either the:
• WD Security or WD Drive Utilities software
• WD SmartWare software
• WD Drive Unlock utility
CAUTION! After changing a password, the drive remains unlocked for as long as you
continue your current work session. Then the WD Security software:
• Locks the drive when you shut down your computer, disconnect your drive, or your
computer goes into the sleep mode
• Requires you to type your password to unlock the drive when you restart your
computer or reconnect your drive, UNLESS you selected the Enable auto unlock
for user: check box when you changed your password