WD TV Live Streaming Media Player
User Manual
SETUP AND ADVANCED FEATURES – 177
HDMI CEC
Use this menu to set HDMI CEC to ON (OFF is set by default).
The CEC function allows HDMI devices to control each other when necessary,
allowing you to operate multiple devices with a single remote control for one of the
devices. By turning HDMI CEC ON, you can:
Press the power button on the WD TV or other HDMI CEC device remote
controller to power on or off both the media player and your HDTV or other
devices.
Press FF/REV, Play/Pause, Navigation, OK, Mute, and numeric keys on the WD
TV or other HDMI CEC device remote controller to control multiple devices.
Press the 1 or 2 buttons on the WD TV or other HDMI CEC device remote
controller to control TV volume. Press 1 to increase volume and press 2 to lower
volume.
Note: The HDMI CEC function only works with HDMI CEC-compatible devices. Not all operations of
each HDMI device can be controlled with a single remote control. Depending on the specifications of
your HDMI-CEC compatible device, some or all functions listed above may not work even if the device
is HDMI-CEC compatible.
Dolby Dynamic Range Control (DRC) Setting
Use this menu to set the dynamic range control, which reduces or increases sound
levels. This setting can be useful when, for example, you want to watch a movie
without hearing wide volume swings between loud and quiet sounds. DRC thus
enables reduced peak volume levels without loss of overall sound quality. Default
setting is On. Options are Off, Enable DRC for All Files, Enable DRC for
Compatible Files, and Max.