5APPENDIX
Troubleshooting
No Power
ξMake sure power cord is securely connected to the AC In jack on the back of the High Definition LCD TV.
ξMake sure AC power cord is securely connected to the AC socket.
ξPlug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage.
ξWhen set to E. Saver, the TV will take longer to turn on. Change the Power menu setting to Normal to improve power on time.
Power is suddenly turned off
ξCheck if Sleep Timer is set. If so, turn it off.
ξCheck if Inactivity Off is set. If so, turn it off.
Remote Control Does Not Work
ξPress only one button at a time.
ξMake sure batteries are inserted correctly.
ξReplace batteries with new ones if necessary.
Remote Control Code Not Found in a “Universal” Remote
ξPurchase a separate “learning” remote control.
ξGo to www.westinghousedigital.com for a list of remote codes.
Image Quality Issues
ξFor the best TV image quality, “Standard Definition” TV content should be viewed in 4:3 format.
No Picture
ξCheck the video connection.
ξMake sure the video cable connected to the High Definition LCD TV is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the High Definition LCD TV, secure it tightly.
ξAdjust brightness and contrast.
ξIf you are using a Macintosh computer older than G3, you need a Macintosh adapter.
ξMake sure that the input source you are connected to corresponds to the source on the High Definition LCD TV.
ξVerify that the antenna is properly connected.
No Picture when I connect VGA cable or “No Input Signal”
ξCheck VGA cable connection.
ξLower the video resolution on the computer and try plugging in the cable again.
English
33
