Note: Before starting this step refer to accompanying instruction sheet to install adapter brackets to flat panel screen.
Installing Flat Panel Screen to Wall Plate
2 | Insert two M5 x 25 mm socket head cap screws (DD) into mounting brackets (BB) and tighten a few turns to hold in |
| place as shown in detail 1. Hang screen by the mounting brackets (BB) on wall plate (AA) as shown below. Make |
sure screen is safely hooked on mount before letting go. Screen can be adjusted horizontally if desired.
WARNING
•Always use an assistant or mechanical lifting equip- ment to safely lift and position the plasma television.
detail 1
Adding Safety to Mount
BB
BB
AA
3 | Secure mounting brackets to wall plate (AA) with socket head cap screws as shown below and in detail 1. Tighten |
screws with 4 mm security allen wrench (FF). |
BB
DD
AA
DETAIL 1
7 of 8 | ISSUED: |
Visit the Westinghouse Web Site at www.westinghousedigital.com | For customer service call |
