W-375
082814
Owner’s Manual
Indoor Lighting Fixture
Installation Instructions
WARRANTY INFORMATION
This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.
This warranty does not cover costs of removing and re-installing the lighting fixture.
If this product fails for any reason covered by this warranty, contact us toll free at 1-888-417-6222.
WARNING: ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essen- tial for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not dam- age electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are pro- vided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.
NOTE: For fixture employing a grounded convenience outlet. This fixture employs a grounded type receptacle and is not intended for connection to a two wire ungrounded source of supply.
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE
Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting. com/contact-us.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any pack- ing materials (see figure 1).
MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.
1.Turn off power at circuit box to avoid possible electric shock.
2.Thread mounting screws (A) into mounting bar (B) (see fig. 1) approximately 1/4 inch.
3.Secure mounting bar (B) to outlet box (C) with outlet box screws (D) (if applicable).
4.Identify color coding of fixture wires (see fig. 2).
5.Connect the black wire from the fixture with the black wire (live wire) from the outlet box by wire connector, and wrap the wire connector with electrical tape for a more secure connection.
6.Connect the white wire from the fixture with the white wire (neutral wire) from the outlet box by wire connector, and wrap the wire connector with electrical tape for a more secure connection.
7.Partially thread green grounding screw (F) into side hole (G) on mounting bar (B) (see fig.1).
8.Wrap grounding wire from fixture around green grounding screw stem (F) leaving enough excess wire, then connect the excess grounding wire from the fixture with the grounding wire from outlet box by wire connector (E) (if applicable), then wrap the wire connector (E) with electrical tape for a more secure connection.
9.Tighten green grounding screw (F). Do not over tighten.
10.Tuck wires inside outlet box (C).
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1.Raise canopy (H) to ceiling allowing mounting screws (A) to protrude through key slots (I) in canopy (H) (see fig. 1).
2.Rotate canopy (H) clockwise until mounting screws (A) lock into narrow portion of key slots (I). Secure into place with mounting screws (A).
3.Install lamp(s). Do not exceed recommended wattage.
4.Raise glass shade (J) to canopy (H) allowing nipple (K) to protrude through opening.
5.Carefully support glass shade (J) while securing washer (L), hex nut (O), cap (M), and finial (N) to nipple (K).
6.Turn power back on at circuit box.
FIGURE 2.
FIXTURE | FIXTURE | FIXTURE |
WIRES: | WIRES: | WIRES: |
Black | White | Bare |
| | Copper |
| | (Ground) |
HOUSE | HOUSE | HOUSE |
WIRES: | WIRES: | WIRES: |
Black | White | Bare |
(Hot) | (Neutral) | Copper |
| | (Ground) |
WARNING
Turn off electricity to the mounting site before beginning installation.
Guide d’utilisation
Instructions d’installation
Appareil d’éclairage pour utilisation intérieure
GARANTIE LIMITÉE DE CINQ ANS
Cet appareil d’éclairage Westinghouse est assorti d’une garantie de 5 ans contre les défauts de matéri- aux et de fabrication, qui entre en vigueur à partir de la date d’achat. La présente garantie se substitue à toute autre garantie expresse ou tacite.
Cette garantie ne porte ni sur les dommages survenant suite à une catastrophe naturelle (telle que la foudre), ni sur la corrosion ou la décoloration des pièces; la garantie ne porte pas sur les dommages survenant suite à une utilisation anormale, une installation impropre, une surtension de courant élec- trique ou des actes d’un tiers.
Cette garantie ne porte pas sur les frais de démontage et de réinstallation du ventilateur.
Si ce produit ne fonctionne pas, pour une raison quelconque couverte par cette garantie, contactez- nous gratuitement au numéro suivant : 1-888-417-6222.
MISE EN GARDE: L’ÉLECTROCUTION POURRAIT CAUSER DE GRAVES BLESSURES PERSONNELLES.
Lisez ces instructions et suivez-les exactement comme illustré. En cas de doute, ne commencez pas l’installation. Consultez un électricien qualifié. Lisez toutes les instructions avant de com- mencer l’installation. Un câblage approprié est essentiel au bon fonctionnement de cet appareil d’éclairage. Lorsque vous faites une entaille ou que vous percez un trou dans un mur ou un plafond, n’endommagez pas les câbles électriques, les canalisations de gaz ou d’eau. Si l’un des composants de raccordement ou de l’appareil d’éclairage est endommagé, n’installez pas cet appareil d’éclairage. Retournez-le à l’endroit où vous l’avez acheté.
Convient uniquement aux appareils comportant un avertissement indiquant que l’appareil d’éclairage est doté d’un fil supportant une chaleur de 75°C ou 90°C. (Ces avertissements se trouvent sur l’étiquette U.L. et sur l’emballage de l’appareil d’éclairage.)
NOTA: Pour appareil d’éclairage avec sortie terre. Cet appareil d’éclairage utilise un réceptacle muni d’un fil de terre et ne doit pas être branché à un bloc d’alimentation à deux fils non mis à la terre.
LES INSTRUCTIONS D’ASSEMBLAGE DE L’APPAREIL D’ÉCLAIRAGE POUR UTILISATION INTÉRIEURE
Félicitations ! Vous avez acheté un produit de Westinghouse Lighting. Cet appareil d’éclairage a été conçu pour durer de nombreuses années. Si vous avez des questions ou des commentaires à nous communiquer, veuillez visiter www.westinghouselighting.com/contact-us.
NOTA : Déballez soigneusement l’appareil d’éclairage et les pièces. Assurez-vous que toutes les pièces y sont avant de mettre l’emballage au rebut (voir fig. 1).
FIGURE 1.
GROUND
WIRE
SIDE
HOLE (G)
GREEN
GROUNDING
SCREW (F)
MOUNTING
SCREWS (A)
NIPPLE (K) 
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.
*OUTLET BOX (C)
WIRE
CONNECTORS (E)
MOUNTING
BAR (B)
OUTLET BOX
SCREWS (D)
CANOPY (H)
KEY SLOTS (I)
GLASS
SHADE (J)
WASHER (L)
HEX NUT (O)
CAP (M)
FINIAL (N)
*NOT SUPPLIED
Mounting instructions must be followed exactly as shown for the fixture to be safely sup- ported.
CLEANING AND CARE
To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
NOTE FOR FIXTURES THAT ARE SOLID BRASS:
Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acrylic lac- quer which gives maximum protection against the weather. However, in time the brightness of the brass will tarnish, giving way to an authentic old-world brass finish. To keep your solid brass fixture looking new for years to come, regularly apply a good quality, non-abrasive car wax to all metal sur- faces, giving the fixture an extra protective covering.
ORDERING PARTS
Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.
Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. | www.westinghouselighting.com |
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting. | All rights reserved. | Made in China |
FIGURE 1.
FIL DE MISE
A LA TERRE
TROU
LATERAL (G)
VIS DE MISE
A LA TERRE (VERTE) (F)
VIS DE 
FIXATION (A)
MANCHON
FILETE (K)
Il est possible que le dessin illustré ici ne soit pas la reproduction exacte de l’appareil d’éclairage contenu dans la boîte.
Les instructions d’installation demeurent cependant valables.
*BOITE DE SORTIE DE COURANT (C)
CONNECTEURS
DE FIL (E)
BARRE DE
FIXATION (B)
VIS DE LA BOITE DE
SORTIE DE COURANT (D)
CHAPEAU (H)
RAINURES (I)
ABAT-JOUR
EN VERRE (J)
RONDELLE (L)
L’ECROU
HEXAGONAL (O)
CAPUCHON (M)
ECROU
DECORATIF (N)
*NON FOURNI
