Troubleshooting guide

ETL-ES-Turbo Swirl CFL-WH10

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

TROUBLE

SUGGESTED REMEDY

 

 

1. If fan does not start:

1. Check main and branch circuit fuses or circuit breakers.

 

2.

Check wire connections as performed in step #15 or #16 of installation.

 

 

CAUTION: Make sure main power is turned off.

 

3.

Make sure forward/reverse switch is firmly in up or down position.

 

 

Fan will not operate when switch is in the middle.

 

4.

If the fan still will not start, contact a qualified electrician.

 

 

Do not attempt to troubleshoot internal electrical connections yourself.

2. If fan sounds noisy:

1. Check to make sure all screws in motor housing are snug (not over tightened).

 

2.

Check to make sure the screws which attach the fan blade holder to the motor are tight.

 

3.

Some fan motors are sensitive to signals from Solid State variable speed controls.

 

 

DO NOT USE a Solid State variable speed control.

 

4.

Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear

 

 

after this period.

3. If fan wobbles:

All blades are weighed and grouped by weight. Natural woods vary in density which could cause

 

the fan to wobble even though all blades are weight-matched. The following procedures should

 

eliminate most of the wobble. Check for wobble after each step.

 

1.

Check that all blades are screwed firmly into blade holders.

 

2.

Check that all blade holders are tightened securely to motor.

 

3.

Make sure that canopy and mounting bracket are tightened securely to ceiling joist.

 

4.

If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute

 

the weight and possibly result in smoother operation.

4. If light does not work:

1. Check to see that the wire connections in the switch housing are connected.

 

2.

Check for faulty light bulbs.

 

3.

If light kit will still not operate, contact a qualified electrician for assistance.

 

 

 

NOTICE

This ‘Energy Policy Act 2005’ compliant fan includes a device that limits the total wattage of its light fixture to 190 watts.

By installing a combination of light bulbs that exceeds 190 watts or if an electrical surge causes the wattage to exceed 190 watts, the light fixture will either dim the lights to 190 watts or will automatically turn off.

To restore the light levels, make sure the total wattage of the light bulbs does not exceed 190 watts and follow the applicable directions below:

For fans with Pull Chains:

Pull the light fixture’s pull chain two times to reset the light fixture. If the power to your fan is controlled by a toggle wall switch, it may be necessary to turn the power off and back on at the wall switch.

For fans with Wall Controls:

Press the light button on the wall control “off” and “on”

once to reset the light fixture.

For fans with Remote Controls:

If you verify the wattage and the lights do not turn on, press the light button on the remote control twice to reset the light fixture.

NOTE: If the procedures above do not reset the lights,

turn off the main power source, located at the breaker panel or box,

and then turn it on again.

21

Page 21
Image 21
Westinghouse WH10 owner manual Troubleshooting guide

WH10 specifications

The Westinghouse WH10 is a compact and efficient portable generator designed to meet the diverse power needs of both homeowners and outdoor enthusiasts. With a robust power output and advanced features, it stands out as a reliable choice for those seeking backup power during emergencies or supplemental energy for recreational activities.

One of the standout features of the Westinghouse WH10 is its 10,000 peak watts and 8,000 running watts, providing ample power to run essential appliances, tools, and devices. Whether it’s powering a refrigerator, HVAC system, or various power tools, the WH10 ensures a steady flow of electricity. This generator is equipped with a powerful 457cc Westinghouse engine, known for its durability and performance, allowing for extended run times.

The WH10 utilizes advanced technology to enhance user experience and safety. The generator features a Digital Automatic Voltage Regulation (AVR) system that ensures stable voltage output, protecting sensitive electronics from power surges. The intuitive control panel provides easy access to multiple outlets, including 120V household outlets and a 120/240V twist-lock outlet, enabling users to connect various devices effortlessly.

For ease of transport, the Westinghouse WH10 is designed with a rugged yet lightweight frame, complemented by two wheels and a telescoping handle, making it easy to maneuver in different environments. Its compact design allows for convenient storage when not in use.

Additionally, the generator boasts an efficient fuel consumption system, allowing it to operate for up to 12 hours on a single tank of gasoline, depending on the load. This fuel efficiency not only saves money but also reduces environmental impact.

Safety features are a key component of the WH10 design. It includes an automatic low oil shutdown that ensures the engine operates within safe parameters, preventing damage from running out of oil. The integrated circuit breaker adds another layer of protection against overloading.

Moreover, the Westinghouse WH10 operates with a noise level of around 60 decibels, making it relatively quiet for its class, thus minimizing disturbance during operation. This generator is backed by a three-year warranty and lifetime technical support, ensuring peace of mind for users.

In summary, the Westinghouse WH10 is a powerhouse generator equipped with advanced technologies, excellent safety features, and user-friendly design, making it an ideal solution for power needs in various situations. Whether used at home, on a job site, or during recreational activities, it provides a reliable and efficient power source that users can trust.