OPERATING INSTRUCTIONS
Using as a Dry Iron
The Iron can be used on the dry setting with or without water in the Water Tank. However, it is best to avoid having water in the Water Tank while dry ironing.
1.Turn the Temperature Control Dial to the “MIN” setting and make sure that the Steam Button is in the NO STEAM position.
2.Stand the Iron in the vertical position (on its Heel Rest) on a heat resistant surface and plug into a 127V outlet.
3.Turn the Temperature Control Dial to the desired setting. The red Thermostat Light will illuminate, indicating that the Iron is heating.
NOTE: For best results, check garment labels for the tem- perature setting recommended by the fabric manufacturer.
4.Once the Iron has reached the set temperature, the red Thermostat Light will go off, indicating that the Iron is ready for use.
NOTE: The red Thermostat Light will continue to cycle off and on during use as the Iron maintains the desired temperature.
5.When changing from a higher temperature setting to a lower temperature setting, wait until the red Thermostat Light cycles on and then off again before ironing.
6.When finished ironing, turn the Temperature Control Dial to the “MIN” position and unplug the Iron. Stand the Iron back in the vertical position (on its Heel Rest) and allow it to cool completely before cleaning or storing.
WARNING: Never fill the Water Tank while the Iron is still hot.
5