Wharfedale DM4.0S brochure Overview, Polar Charts, Specifications

OVERVIEW

The DM4.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch (model DM4.0S). Characteristics of the DM4.0, such as a tight super-cardioid pickup pattern with a frequency response of 45Hz – 18kHz, slight bass proximity and mid range presence result in a warm and natural sounding response for every application. The DM4.0 is engineered to handle very high source levels without distortion and provides over 36dB of off axis feedback rejection.

Low impedance and balanced output allow for interference free performance. The DM4.0 is built solidly with a cast alloy body, steel mesh grille ball and internal pop screen.

POLAR CHARTS

The frequency response curve shown above (measuring response at +3dB) and polar pattern correspond to typical production run specifications for this microphone.

SPECIFICATIONS

Transducer Type:	Dynamic
Frequency Response:	45Hz−18KHz
Polar Pattern:	Super-cardioid
Output Impedance:	250ohms
Sensitivity:	–53dB (0dB=1V/Pa)
Off-axis rejection:	>26dB at 125o
Maximum SPL:	>136dB
Cable/Connector:	3 pin gold plated male XLR
Polarity:	Positive voltage on pin 2
	relative to pin 3 of output
	XLR connector
Housing:	Zinc alloy
Weight:	330 grams/11.75 oz.

www.wharfedalepro.com

IAG House, Sovereign Court,Ermine Business Park, Huntingdon, Cambs P E29 6XU England

Tel: +44(0)1480 447700 Fax: +44 (0)1480 431767

The information in this brochure is subject to change without notice. All rights reserved. © 2006 Wharfedale Pro. Wharfedale Pro is a member of the International Audio Group.

DM4.0_Brochure RevC.indd 2

10/18/06 5:19:24 PM