™ 
Titan Sub-A15 – REAR PANEL CALL-OUTS
1.INPUT A - Balanced line level input via a XLR / ¼” combo connection.
2.OUTPUT A - Balanced male XLR connection provides output “THRU” or HIGHPASS signal (depending on switch setting).
3.SPEAKER LEVEL INPUT -
Allows for connection of the output of an external amplifier to use the Titan
NOTE: Disconnect the power cord when using the Titan
4.INPUT B - Balanced line level input via a XLR / ¼” combo connection.
5.OUTPUT B - Balanced male XLR connection provides output “THRU” or HIGHPASS signal (depending on switch setting).
6.HEATSINK - Cooling fins for amplifier. Do not obstruct.
7.VOLUME CONTROL - Adjusts volume level of the subwoofer.
1 INPUT A
2 OUTPUT A
3 SPEAKER LEVEL INPUT
4 INPUT B |
INPUT
(BALANCED)
A
SPEAKER |
LEVEL IN |
OUTPUT
(BALANCED)
I | 0 | I |
I |
| I |
I |
| I |
I |
| I |
_8I |
| IMAX |
VOLUME | ||
THRU |
| 0° |
(100Hz) |
| 180° |
HIGHPASS |
|
|
PHASE
WWW.WHARFEDALEPRO.COM
|
| CAUTION | ! |
|
| RISK OF ELECTRIC SHOCK | |
|
| DO NOT OPEN | |
| WARNING: SHOCK HAZARD DO NOT OPEN | ||
AVIS: RISQUE DE CHOC ELECTRIQUE | |||
LIMIT |
| N 2082 | |
HEATSINK 6
VOLUME 7 CONTROL
THRU / HIGHPASS | 8 |
SWITCH | 9 |
PHASE SWITCH | |
LIMIT LED | 10 |
5 OUTPUT B |
B
|
| ON |
(BALANCED) | (BALANCED) | OFF |
INPUT | OUTPUT |
|
POWER | AC |
| ||||||||||||||||||||
|
| FUSE T4AL250V |
| |||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER LED 11 |
POWER SOCKET 12
POWER SWITCH 13
SERIALNUMBER
8.THRU / HIGHPASS SWITCH - Selects the signal type that is routed to the OUTPUT jacks. “THRU” sends the unprocessed signal to the outputs. “HIGHPASS” filters the signal and only sends signals above 100Hz to the outputs.
9.PHASE SWITCH - Selects the polarity of the signal being sent to the subwoofer. 0° selects the signal polarity as it appears at the input. The “180°” selection inverts the phase of the signal.
10.LIMIT LED – LED indicator illuminates when the signal limiting function is activated.
11.POWER LED - LED indicator illuminates when the unit is powered up.
12.POWER SOCKET - This is the connection for the IEC AC power connector.
13.POWER SWITCH – Turns the power on and off to the subwoofer amplifier module.
7
