O S E L O U D S P E A K E R S Y S T E M S

APPLICATION: Twin X series of foreground/back-ground music speakers designed for demanding professional applications such as the reproduction and reinforcement of music and sound in venues as diverse as discotheques, airports, places of worship, retail premises, restaurants and public houses.

DESCRIPTION:Twin-8X, 1 x 8” coaxial two-way full-range drive unit plus 2” HF driver, trapezoid, ported acoustically-efficient enclosure.Twin-10X, 1 x 10” coaxial two-way full-range drive unit plus 2” HF driver, trapezoid, ported acoustically-efficient enclosure. Twin-12X, 1 x 12” coaxial two-way full-range drive unit plus 2” HF drive unit, trapezoid, ported acoustically-efficient enclosure.Twin-15X, 1 x 15” coaxial two-way full- range drive unit plus 2” HF drive unit, trapezoid, ported acoustically-efficient enclosure.

SUB BASS UNITS: Twin-15XSB, 1 x 15” bass unit, rectangular, ported acoustically-efficient enclosure.Twin- 18XSB, 1 x 18” bass unit, rectangular, ported acoustically-efficient enclosure.

CONSTRUCTION: All units are constructed from birch plywood. All full range units are fitted with a full steel grille. Subwoofers are fitted with a partial steel grille.

FINISH: All Twin X models are available in a black or white impact resistant multiple layered paint finish with rugged metal grille with acoustic foam backing as standard.

DEPLOYMENT: The Twin-X can be mounted in a vertical or horizontal position using the mounting bracket hardware. All models have been designed for installation with the use of suitable ancilliary commercial mounting equipment. They can be installed on the wall or ceiling flush mounted, or combined in groups of two and four in a column or on floor stands.

IMPORTANT NOTE See Warning Section on RIGGING • SUSPENDING • MOUNTING before attempting to install Wharfedale Pro Twin-X series of speakers.

Ensure you use the M10 eyebolts for any mounting hardware used with the Twin-X.

HF PROTECTION: The Twin X series speakers are equipped with The “PRO-TECH”™ System, a dynamic tweeter protection circuit, composed of an accurate and sensitive protection lamp. When high signal levels are present that may pose a dangerous overload for the tweeter coil, the protection circuit will activate immediately to limit the power sent to the transducer.

OPERATION/USE:

1. The Twin-X Series will accept cables with Speakon™ connectors. The units feature two Speakon™ type connectors situated at the rear of each cabinet. This type of connection is easy to use as it requires no additional solder. The rear of the unit will feature two parallel sockets labelled ‘Input’ and ‘Output’. The pins of these sockets are paralleled with the unit itself. Pin +1 is positive and Pin -1 is negative in accordance with standard wiring regulations (see diagram below). The SUB models feature an additional Speakon Hi Pass output. These are connected in parallel. Take care to avoid adding too many Twin-X Series speakers in series. Each speaker connected in series increases the load on the amplifier and can add up to a total load that may exceed the amplifier’s capabilities, leading to possible damage. Two 8 Ω loudspeakers in series make a 4Ω total load. Four 8Ω series connected loudspeakers make a total load of 2Ω, which is too low for many amplifiers.

2.Attach the speaker cable securely to your Twin-X unit and power amplifier (the amplifier should be off, power down mode). Where possible use Speakon™ connectors as they are professional high current connections specifically designed for this application. Try to use the correct type of speaker cable according to the handling ability of your Twin X cabinet. Use 2 core equal stranded insulated cable for speaker runs. It is always advisable to use heavier conductor cables on longer runs.

3.If using Speakon™, insert the speakon and rotate 1/8 of a turn until locked in.

4.Power up amplifier with levels on zero. Confirm units are operating.

5. Take care to try and avoid running the amplifier into clip (overdriving) for any length of time as this will result in damage to the voice coil of the loudspeakers.

6.If you are using amplifiers from different manufacturers then make sure the gain variation between the models is less than +/-5dB.

Speakon™ Plug Connection

Pin 1+ = + on amp terminal

Pin 1- = - on amp terminal

Page 3 Page 5
Page 4
Image 4
Wharfedale Twin X Series user manual E L O U D S P E a K E R S Y S T E M S, Operation/Use
Page 3 Page 5

Twin X Series specifications

The Wharfedale Twin X Series is an innovative range of loudspeakers designed for music lovers who appreciate high-fidelity sound and stylish aesthetics. With an emphasis on delivering exceptional audio performance, the Twin X Series stands out in the crowded marketplace of loudspeakers.

One of the most impressive features of the Twin X Series is its advanced driver technology. Each speaker is equipped with a bespoke woven Kevlar cone woofer that ensures accurate bass response while maintaining clarity across the entire frequency range. This cone material is known for its stiffness and lightweight properties, allowing for better control and reduced distortion during playback.

Additionally, the Twin X Series employs a specially designed soft dome tweeter. This tweeter enhances the high-frequency response, providing detail and precision in the upper registers. Together, these drivers create a cohesive and balanced sound profile that allows listeners to fully experience the nuances of their favorite music.

A key characteristic of the Twin X Series is its modern design. These speakers feature a sleek, minimalist aesthetic with a choice of attractive finishes that can seamlessly integrate into any home decor. The cabinets are constructed from high-quality MDF, reducing unwanted resonances and contributing to the overall sound quality. Furthermore, the rounded edges of the cabinets not only enhance their visual appeal but also help to minimize diffraction, resulting in a more immersive listening experience.

Connectivity is another strong point of the Wharfedale Twin X Series. The speakers are designed to be versatile, capable of working with a variety of audio systems. They feature both bi-wiring and bi-amping options, allowing the user to optimize their audio setup for even better performance. This adaptability ensures that the Twin X Series can grow with the listener's needs as they evolve.

The Wharfedale Twin X Series also includes thoughtful design elements like magnetic speaker grills that offer flexibility of use. These grills help protect the drivers while maintaining a clean, unobstructed look when removed.

In summary, the Wharfedale Twin X Series presents a perfect blend of advanced technology, stylistic design, and versatility. With its focus on audio fidelity, robust construction, and user-friendly features, this series is an outstanding choice for anyone serious about sound quality and aesthetics in their listening environment. Whether used for music, movies, or gaming, the Twin X Series promises a captivating auditory experience.
Top Page Image Contents