USER INSTRUCTIONS: WH2.1 SYSTEM

WH-SR1 and WH-SR2 Loudspeakers

The Wharfedale WH-SR1 and WH-SR2 are bipolar units designed for wall mounting and intended for use solely as rear effects speakers.

In a Home Theatre System, the directional cues come from the front and centre channels. The rear channels provide ambience and rear perspective and for this purpose a bipolar design with its mix of direct and reflected sounds ideal. To aid this effect we recommend placing the WH-SR1 and WH-SR2 speakers in a high position behind the listener.

PREPARATION

Each speaker is supplied with four self-adhesive feet. Apply one to each rear corner before mounting.

CONNECTIONS

You will need one length of twin core cable per speaker. Connect the red (+) terminal of the Left rear unit to the red (+) terminal of the amplifiers Left rear channel output. Connect the black (-) terminal of this unit to the corresponding black (-) terminal of the amplifier. Repeat for the Right speaker. The connection panel uses screw terminals - the drawing above illustrates the connection.

MOUNTING

Connect the cable to the speaker. Site the speakers about 600 mm above the listening position and 2.5-3.5 metres apart, central to the listener and behind the listening position. Ensure that the wall is sound and can support the product. Fix a suitable screw firmly to the wall.

Preparing

Connecting

Speaker

Speaker

Cables

Cables

Wall-mounting the

1

WH-SR1 and WH-SR2

Loudspeakers

2

3

 

Rear Channel Connections

RIGHT

LE T

CENTRE

RIGHT

LEFT

 

REAR

FRONT

 

REAR RIGHT

 

AV AMPLIFIER

REAR LEFT

 

 

 

Page 4
Image 4
Wharfedale WH-C manual WH-SR1 and WH-SR2 Loudspeakers, Preparation, Connections, Mounting