Whirlpool 015-0005 Total Massage Circuit with Optional Heater, Total Massage Whirlpools, AMP Gfci

ELECTRICAL INSTALLATION INSTRUCTIONS (continued)

TOTAL MASSAGE WHIRLPOOLS

The whirlpool pump and blower should be installed on a 120 vac, 20 amp dedicated circuit. The circuit should be hard-wired from the electrical power supply panel. The circuit must be a three (3) wire circuit from the electrical supply panel. A grounded neutral wire and a third wire, earth ground, are essential. A SEPARATE 15 AMP MAXIMUM GFCI

CIRCUIT IS REQUIRED IF THE OPTIONAL HEATER IS INSTALLED (SEE INSTALLATION INSTRUCTIONS

SUPPLIED WITH THE HEATER MODEL NUMBER – 494-1000).

TOTAL MASSAGE CIRCUIT WITH OPTIONAL HEATER

CONTROL PAD
PUMP	PUMP
	FLOW	VARIABLE
TIMER	CONTROL	CONTROL
CONTROL	VALVE	BLOWER
PUMP

HEATER

120 V, 60 Hz

15 AMP GFCI

ELECTRICAL

FEED

120 V, 60 Hz

20 AMP GFCI

GFCI GFCI

754764-100 Rev. A 12