Whirlpool 1-34850/4390527 Installing it properly, Leveling it, Before Using Your Refrigerator

BEFORE USING YOUR REFRIGERATOR

Installing it properly

1.Allow 4 inches (10.2 cm) of space be- tween overhead cabinets and refrigerator top.

2.Allow at least 3 inches (7.5 cm) between back of cabinet and the wall.

3.Allow 1 inch (2.5 cm) of space on each side of the refrigerator for proper air circulation.

4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.

5.Level your refrigerator.

Leveling it

Keep the 2 bolts that keep the refrigerator in the shipping crate. They are the front leveling legs.

1.Screw these legs all the way into the bolt

holes in the bottom corners of the refrig- erator.

2. Slide the refrigerator into place.

3. Lower the front legs just enough to lift the cabinet front off the floor.

4. Adjust the legs to level the refrigerator.

• Turn clockwise to LOWER. LOWER RAISE

• Turn counterclockwise to RAISE.

5.Check with level.

	1-800-447-6737
6	W I T H Q U E S T I O N S O R C O M M E N T S