Whirlpool 1159801 manual OperatingYourAirConditioner, Startingyour air conditioner

OperatingYourAirConditioner

Startingyour air conditioner

Electrical Shock Hazard

Plug into a grounded three-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Failure to follow these instructions can result in death or electrical shock.

Fire Hazard

Do not use an extension cord.

Doing so can result in death, fire, or electrical shock.

1.Set Exhaust Control to CLOSED for maxi- mum cooling.

2.Set System Control to the desired setting.

LO COOL	.......... for sleeping	comfort
MED COOL	.............for normal	cooling
HI COOL	........ for maximum	cooling
FAN ONLY ..,.................... for circulating		room air
	when no cooling is desired

3.Turn the Thermostat Control to number 6 (mid-setting). You can adjust the air condi- tioner’s cooling performance by resetting the Thermostat Control to a higher number for maximum cooling. Lower the number setting for less cooling. You will need to experiment to find the setting which suits you best.

NOTE: If you turn your air conditioner off or if the compressor turns off when lowering the Thermo- stat Control, wait at least 3 minutes before turning it back on or you may blow a fuse or trip a circuit breaker.