3
INSTALLATION REQUIREMENTS

Electrical Requirements

Specific electrical requirements are listed in the chart below.
Follow the requirements for the type of plug on the power su pply
cord.
Recommended ground method
For your personal safety, this dehumidifier must be grounded.
This dehumidifier is equipped with a power supply cord having a
grounded 3 prong plug. To minimize possible shock hazard, the
cord must be plugged into a mating, grounded 3 prong outlet,
grounded in accordance with all local codes and ordinances. If a
mating outlet is not available, it is the customer's responsibility to
have a properly grounded 3 prong outlet installed by a qualified
electrical installer.
It is the customer's responsibility:
■To contact a qualified electrical installer.
■To assure that the electrical installation is adequate and in
conformance with National Electrical Code, ANSI/NFPA 70 -
latest edition, and all local codes and ordinances.
Copies of the standards listed may be obtained from:
National Fire Protection Association
One Batterymarch Park
Quincy, Massachusetts 02269

Location Requirements

■You will need a level surface strong enough to support the
dehumidifier when its bucket is full of water.
■Keep all outside doors, windows and other openings closed
when you are operating dehumidifier. Humid outdoor air will
increase dehumidifier workload.
■Install dehumidifier in an area where the temperature will not
fall below the minimum operating temperature for your
control type. Lower temperatures will cause your
performance to drop.
Power supply cord
plug outlet Wiring requirements
■115 volt (103.5 min. -
126.5max.)
■15-amp time-delay fuse or
circuit breaker
WARNING
Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.

Do not remove ground prong.

A. Allow at least 12" to 18" (30.5 to 45.7 cm) of air space on all
sides of the dehumidifier.
A
A