Before you plug if in, Install Properly, Cleali It

Before you plug if in

Before using your freezer, you are personally responsible for making sure that it...

l is installed and leveled on a floor that will hold the weight, and in an area suitable for its size and use.

l is connected only to the right kind of outlet,

with the right electrical supply and grounding.

l is used only for jobs expected of home freezers.

l is not near an oven, radiator or other heat source.

is prc Derly maintained.

is in c: dry sheltered place.

is use 3 in an area where the room tempera- ture v~,ill not exceed 110 F (43.3 C].

is not run where there are explosive fUmeS.

is not Iused by children or others who may not unde stand how it should be used.

is not loaded with food before it has time to get p.operly cold.

Flush against back wall and cabinets

Rem,)ve the Consumer Buy Guide label and any in ide labels before using the freezer. Re- move c:ny left over glue with rubbing alcohol.

INote: DO NOT REMOVE the Tech Sheet fas- tene j behind the base grille.

Clec.1 your freezer before using it. See clean- ing insiluctions on page 5.

1.Check the strength of the floor. It should hold the weight of fully loaded freezer.

2.Pick a safe place, indoors, away from in-

flammables such as gasoline.

3.Freezer may be installed flush against wall in back and cabinets on each side.

so that door will stay open at any position.

1. Remove base grille (see page 4 ).

Freeze power 1:

Recommended Grounding Method

A 121 Volt, 60 Hz., AC only, 15 ampere fused electric,al supply is required. It is recommended that a separate circuit serving only this appli-

ance t le provided. The receptacle should not be controlled by a wall switch or pull chain.

Do not use an extension cord.

See Individual electrical requirements and

grouncilng instruction sheet in your literature packal:je.

Raise Lower