Reversing the door swing TOOLS NEEDED:
5A6-inch hex-head socket wrench, No. 2 Phillips screw-
driver, flat-head screwdriver, M-inch open-end wrench
IMPORTANT INFORMATION:
l Before you begin, turn refrigerator OFF, unplug it, and
remove any food from door shelves.
l Remove base grille. (See page 16).
l When removing hinges, keep doors closed until ready
to lift free from cabinet.
l To remove doors, start at the top hinge and work your
way down.
l To remove the center hinge screws, remove the center
hinge pin by turning it % to 5’~ turn. It will pop up.
l To replace doors, start at the bottom hinge and work
your way up.
l Line up doors so they are centered between the sides
of the cabinet and parallel with each other.
l Seal all unused openings with screws or plastic plugs.
Moisture will enter any openings.
l Door seal may be adjusted by adding or removing
shims to the center and bottom hinges.
Reversing the hinges
TOP HINGE
CENTER HINGE I
BOTTOM
HINGE
NOTE:
When replacing the doors, set the door
gap at ‘%-inch (17 mm).
19