■Is the control set correctly for the surrounding conditions?

Refer to the “Setting the Control(s)” section.

■Are the doors closed completely?

Push the doors firmly shut. If they will not shut all the way, see “The doors will not close completely” later in this section.

■Are the condenser coils dirty?

This prevents air transfer and makes the motor work harder. Clean the condenser coils. Refer to the “Cleaning Your Refrigerator” section.

NOTE: Your new refrigerator will run longer than your old one due to its high efficiency motor.

The refrigerator seems to make too much noise

■The sounds may be normal for your refrigerators.

Refer to the “Understanding Sounds You May Hear” section.

The ice maker is not producing ice

■Is the freezer temperature cold enough to produce ice? Wait 24 hours after hook-up for ice production. See the “Setting the Control(s)” section.

■Is the wire shut-off arm in the OFF (arm up) position? Lower the wire shut-off arm to the ON (arm down) position. See the “Ice Maker Operation” section.

■Is the water line shut-off valve to the refrigerator turned on?

Turn on the water valve. See the “Connecting the Refrigerator to a Water Source” section.

■Is an ice cube jammed in the ejector arm?

Remove the ice from the ejector arm with a plastic utensil. Refer to the “Ice Maker Operation” section.

■Does the ice maker mold have water in it or has no ice been produced?

Check to see if your refrigerator has been connected to your home water supply and the supply shut-off valve is turned on. Refer to the “Connecting the Refrigerator to a Water Source” section.

NOTE: If not due to any of the above, there may be a problem with the water line. Call for service.

The ice maker is producing too little ice

■Has the ice maker just been installed?

Wait 72 hours for full ice production to begin. Once your refrigerator is cooled down, the ice maker should begin producing 70-120 cubes every 24 hours.

■Has a large amount of ice just been removed? Allow 24 hours for ice maker to produce more ice.

■Is the control set correctly?

Refer to the “Setting the Control(s)” section.

■Is the water shut-off valve turned completely on?

Turn valve on fully. Refer to the “Connecting the Refrigerator to a Water Source” section.

■Is there a water filter installed on the refrigerator? This filter may be clogged or installed incorrectly.

First, check the filter installation instructions to ensure that the filter was installed correctly and is not clogged. If installation or clogging is not a problem, call a qualified person or a technician.

Off-taste or odor in the ice

■Are the plumbing connections new, causing discolored or off-flavored ice?

Discard the first few batches of ice.

■Have the ice cubes been stored for too long? Throw old ice away and make a new supply.

■Has food in the refrigerator been wrapped properly? Refer to the “Refrigerator Features” section.

■Do the freezer and ice bin need to be cleaned? See the “Cleaning Your Refrigerator” section.

■Does the water contain minerals (such as sulfur)?

A filter may need to be installed to remove the minerals.

The divider between the two compartments is warm

The warmth is probably due to normal operation of the automatic exterior moisture control.

Temperature is too warm

■Are the air vents blocked in either compartment? This prevents the movement of cold air from the freezer to the refrigerator.

Remove any objects from in front of the air vents. Refer to “Ensuring Proper Air Circulation” for the location of air vents.

■Are the door(s) opened often?

Be aware that the refrigerator will warm when this occurs. In order to keep the refrigerator cool, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed.

■Has a large amount of food just been added to the refrigerator or freezer?

Adding a large amount of food warms the refrigerator. It can take several hours for the refrigerator to return to the normal temperature.

■Is the control set correctly for the surrounding conditions?

Refer to the “Setting the Control(s)” section.

There is interior moisture build-up

■Are the air vents blocked in the refrigerator?

Remove any objects from in front of the air vents. Refer to “Ensuring Proper Air Circulation” for the location of air vents.

■Is the door opened often?

To avoid humidity build-up, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. (When the door is opened, humidity from the room air enters the refrigerator. The more often the door is opened, the faster humidity builds up, especially when the room itself is very humid.)

■Is the room humid?

It is normal for moisture to build up inside the refrigerator when the room air is humid.

■Is the food packaged correctly?

Check that all food is securely wrapped. If necessary, repackage food according to the guidelines in the “Refrigerator Features” section. Wipe off damp food containers before placing in the refrigerator.

18

Page 17 Page 19
Page 18
Image 18
Whirlpool 2205266 manual Are the doors closed completely?, Are the condenser coils dirty?, Is the door opened often?
Page 17 Page 19

2205266 specifications

The Whirlpool 2205266 is a sophisticated kitchen appliance that embodies functionality and efficiency, making it a popular choice for modern households. This model is designed with a focus on user convenience, advanced technologies, and energy efficiency, providing a well-rounded cooking experience.

One of the standout features of the Whirlpool 2205266 is its spacious interior. With a generous capacity, this appliance accommodates large meals and multiple dishes, making it ideal for family gatherings or entertaining guests. Additionally, the layout of the interior is thoughtfully organized, allowing for optimal air circulation and even cooking.

The appliance is equipped with a variety of cooking modes, including convection cooking, which enhances heat distribution throughout the oven. This results in faster cooking times and evenly baked dishes, reducing the chances of hot spots that can lead to uneven results. The convection feature is complemented by multiple rack positions, giving users the flexibility to cook large meals or several dishes simultaneously.

User-friendly controls are another hallmark of the Whirlpool 2205266. The intuitive interface allows for quick selection of cooking settings and temperature adjustments. Furthermore, the digital display provides clear feedback, ensuring that users can easily track cooking progress and make necessary adjustments.

Energy efficiency is a crucial consideration for many consumers, and the Whirlpool 2205266 excels in this aspect. It is designed to meet stringent energy standards, helping to reduce monthly utility bills while also being environmentally friendly. The appliance features an eco mode that minimizes energy consumption without sacrificing performance.

Another impressive characteristic of the Whirlpool 2205266 is its self-cleaning function. This feature saves users time and effort by automatically cleaning the interior without the need for harsh chemicals. The self-cleaning cycle effectively breaks down food residues and spills, ensuring that the appliance remains in pristine condition for years to come.

In terms of design, the Whirlpool 2205266 boasts a sleek, modern aesthetic that complements a wide range of kitchen styles. The durable materials used in its construction not only enhance its visual appeal but also ensure longevity.

Overall, the Whirlpool 2205266 is a versatile and reliable kitchen appliance that combines advanced technology with practicality. Its user-friendly features, energy efficiency, and elegant design make it a standout choice for anyone seeking to enhance their cooking experience. Whether preparing everyday meals or special occasion dishes, the Whirlpool 2205266 rises to the occasion.
Top Page Image Contents