Whirlpool 2314466 manual Complete the Assembly, A. Self-locking nut, B. Caster bracket, D. Caster

7.Remove the casters and fasteners from the box.

8.Locate and remove the caster brackets from the FeaturePak.

9.Using ⁵⁄₁₆ –18 x ⁷⁄₈" hex-head bolts, attach one rigid caster and one swivel caster to each caster bracket. The rigid caster fits the front of the bracket and the swivel caster fits on the rear.

10.Insert the hex-head bolts from the bottom and start the self- locking nuts for each caster.

A

B

	C
	D
A. Self-locking nut	C. ⁵⁄₁₆ –18 x ⁷⁄₈" Hex-head bolt
B. Caster bracket	D. Caster

11.Hold the head of the hex-head bolts with a wrench while tightening the self-locking nuts with a socket wrench.

12.Using a ¹⁄₂" socket wrench, remove the four unit bolts (two on each side) from the lower front and rear of the convertible refrigerator/freezer.

NOTE: Do not remove leveling bolt.

Lower Front Corner

A

B

A. Leveling bolt (do not remove)

B. Unit bolt

13.Place the slot in the rear of the caster bracket over the hole in the rear of the convertible refrigerator/freezer. Align the hole in the front of the caster bracket with the hole in the front of the convertible refrigerator/freezer.

Lower Rear Corner

A

B

A. Rear unit hole

B. Caster bracket

14.Hold the bracket in place and insert the unit bolts into the front and rear unit holes and tighten.

NOTE: Do not overtighten the bolts.

15.Insert two of the ¹⁄₄–20 x 1¹⁄₄" self-tapping hex-head bolts and lock washers into the two holes in the side of the caster bracket. Push the caster bracket against the bottom of the convertible refrigerator/freezer and tighten the bolts using a ³⁄₈" socket wrench.

A

A. Caster bracket holes

16.Repeat steps 12 to 15 for the second caster bracket.

Complete the Assembly

1.Lock the front caster wheels.

2.Insert a small piece of cardboard between the caster brake and the floor. This will help prevent the brake from rubbing on the floor.

3.Stand the convertible refrigerator/freezer upright.

4.Replace the base grille by placing the metal clips in the openings in the metal panel and rolling the grille downward until it snaps into place.

5.Unlock the wheels and move the convertible refrigerator/freezer into its desired location.

8