Installation Instructions

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

IMPORTANT: Allow the refrigerator to stand upright for a minimum of 1 hour after unpacking it and before plugging it into the electrical outlet. See “Electrical Requirements.” This allows the refrigerant to settle properly and prevents damage to the cooling system.

Remove packaging materials

■Remove and properly dispose of packaging materials. Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Clean before use

After you remove and properly dispose of all packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

Allow at least 1³⁄₁₆ in. (3 cm) of air space at the back and sides of the refrigerator and 3¹⁵⁄₁₆ in. (10 cm) of air space at the top of the refrigerator. If the hinge side is against a wall, leave extra space so the door can open wider.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, in a location with prolonged exposure to direct sunlight, nor in a location where the temperature will fall below 55°F (13°C).

315/16" (10 cm)

13/16" (3 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection:

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

326031822 specifications

The Whirlpool 326031822 is a versatile and efficient refrigerator designed to meet the needs of modern households. This appliance combines cutting-edge technology with user-friendly features, providing an optimal storage solution for food and beverages.

One standout characteristic of the Whirlpool 326031822 is its spacious interior, which offers a generous capacity for storing groceries. The refrigerator is designed with adjustable shelving, allowing users to customize the layout according to their storage needs. This flexibility ensures that taller items such as bottles or large containers can easily fit, enhancing the overall usability of the space.

In terms of cooling technology, the Whirlpool 326031822 employs advanced cooling systems that maintain consistent temperatures throughout the refrigerator. This feature is essential for preserving the freshness of fruits, vegetables, and dairy products. Additionally, the adjustable temperature controls allow users to select the ideal settings for their specific requirements, ensuring optimal food preservation.

Energy efficiency is another key feature of the Whirlpool 326031822. It is designed to consume less energy compared to traditional models, which not only helps reduce electricity bills but also minimizes environmental impact. This refrigerator is often rated with high energy efficiency ratings, making it a sustainable choice for eco-conscious consumers.

The exterior design of the Whirlpool 326031822 is sleek and modern, featuring stainless steel finishes that complement various kitchen decors. It also boasts a user-friendly interface with easy-to-read temperature displays and intuitive controls, making it accessible for everyone in the household.

Additionally, the Whirlpool 326031822 incorporates innovative features such as humidity-controlled crispers, which keep produce fresh for longer periods. The separate compartments help manage moisture levels, preventing spoilage and extending the lifespan of fruits and vegetables.

Furthermore, it includes a dedicated freezer section, which provides ample storage space for frozen items. The freezer is also equipped with frost-free technology, preventing the buildup of ice and ensuring smooth operation without the need for manual defrosting.

In summary, the Whirlpool 326031822 is an excellent choice for those seeking a reliable and stylish refrigerator. Its combination of spacious storage, advanced cooling technology, energy efficiency, and user-friendly features make it a top contender in the market, catering to the diverse needs of today’s families.

Whirlpool 326031822 Installation Instructions, Unpack the Refrigerator, Location Requirements

Models: 326031822