For standpipe or laundry tub drain systems:

1.Open yellow, single-wire clamp with pliers and slide over hooked end of drain hose to secure the rubber and

corrugated sections together.

A. Hooked end

B. Drain hose

2= Put hooked end of drain hose into laundry tub or standpipe. Rotate hook to eliminate kinks in the hose.

To prevent drain water from going back into the washer:

•Do not straighten hooked end of drain hose. Do not force excess drain hose into standpipe. Hose should be secure, but loose enough to provide a gap of air.

•Do not lay excess drain hose in bottom of laundry tub.

•For floor drain installation, see kit number required under "Tools and Parts."

1.Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.

AB

A.Coupling

B.Washer

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

2.Attach the hose with the red coupling to the hot water faucet. Screw on coupling by hand until seated on the washer.

3.Attach the hose with the blue coupling to the cold water faucet. Screw on coupling by hand until seated on the washer.

Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the valves can result.

Clear the water lines

5.Run water through both faucets and inlet hoses, into a bucket or laundry tub, to get rid of particles in the water lines that might clog the inlet valve screens.

Connect the inlet hoses to the washer

6.Attach the hose with the red coupling to the HOT (right) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand until it is seated on the washer. Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the valves can result.

A. Cold water inlet valve (blue)

B. Hot water inlet valve (red)

Attach the hose with the blue coupling to the COLD water (left) inlet valve. Screw on coupling by hand until it is seated on the washer. Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the valves can result.

Check for leaks

8.Turn on the water faucets and check for leaks. A small

amount of water might enter the washer. You will drain this later.

NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement dates for future reference.

•If you connect only one water hose, you must cap off the remaining water inlet port.

•Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Page 7 Page 9
Page 8
Image 8
Whirlpool 326035915 manual For standpipe or laundry tub drain systems, Connect the inlet hoses to the water faucets
Page 7 Page 9

326035915 specifications

The Whirlpool 326035915 is a standout kitchen appliance designed to enhance both functionality and convenience. This model is primarily known for its commitment to quality and efficiency, making it a popular choice among homeowners seeking reliability in their kitchen equipment.

One of the main features of the Whirlpool 326035915 is its advanced cooking technology. This appliance incorporates a powerful heating element that ensures even cooking and consistent results every time. The precise temperature control allows for a range of cooking methods, whether you’re baking, broiling, or roasting. This versatility enables users to explore a variety of recipes, from classic baked goods to intricate gourmet dishes.

Durability is a key characteristic of the Whirlpool 326035915. Constructed with high-quality materials, it is built to withstand the rigors of frequent use while maintaining a sleek appearance. The appliance features a modern design that complements various kitchen styles, enhancing the overall aesthetic of the space. Its user-friendly interface is equipped with intuitive controls, making it easy for anyone to operate, regardless of their cooking experience.

Another notable technology integrated into this model is the self-cleaning function. This feature minimizes the effort required to maintain the appliance by utilizing high heat to burn off food residues and stains. As a result, owners can enjoy a clean oven with minimal manual scrubbing, freeing up time for other tasks.

Energy efficiency is also a prominent attribute of the Whirlpool 326035915. This appliance is designed to consume less energy while delivering optimal performance. This not only helps in reducing utility bills but also contributes to a more environmentally friendly kitchen.

In summary, the Whirlpool 326035915 combines advanced cooking technology, reliability, durability, and energy efficiency. With its stylish design and user-friendly features, it stands as an essential appliance for anyone looking to elevate their cooking experience. Whether you are a novice cook or a seasoned chef, the Whirlpool 326035915 offers a perfect balance of performance and convenience.
Top Page Image Contents