Stopping/restarting your washer
If necessary, you can stop your washer during a cycle to add more clothes.
l
l
To stop the washer at any time, push in the Cycle Control Knob.
To restart the washer, close the lid (if necessary) and pull out the Cycle Control Knob.
Selecting a cycle and
Your washer’s Cycle Control Knob is shown below. Use the information in this section to help you make the best cycle selections for your wash loads. Each cycle is designed for different types of fabrics and soil levels.
l The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
Super Wash cycle
The Super Wash cycle automatically prewashes the load and advances into the Heavy cycle. (The washer does not have to be reset after the Super Wash cycle.) Use this 15minute cycle when washing heavily soiled loads that need maximum soil re- moval.
NOTE: For proper cleaning, use double the amount of detergent recommended for the load size.
Heavy cycle
The Heavy cycle features high agitation and spin speeds, and a longer final spin to shorten drying time.
lUse 12 minutes of wash time to clean large loads of sturdily constructed fabrics that are moderately to heavily soiled.
time
l An Extra Rinse option is available in all cycles except the Regular cycle.
lRefer to page 9 to help you understand what happens during a wash cycle.
l Use QUICK WASH, 6 minutes of wash time, to clean sturdily constructed fabrics that are lightly soiled.
Regular cycle
The Regular cycle features high spin speeds to shorten drying time. All rinses are cold in this cycle.
l Use NORMAL, 9 minutes of wash time, to clean cotton and linen fabrics that are moderately to heavily soiled.
l Use SOFT WASH, 6 minutes of wash time, to clean cotton and linen fabrics that are lightly soiled.
