What happens in each

When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation can occur with the washer lid up or down.

WASH

Fill

Wash selected time

Drain (or partial drain*)

No agitation

‘The Permanent Press cycle partially drains, fills, agitates briefly, and drains

kJ Spin

Self-cleaning lint filter

The lint filter at the bottom of the washer basket cleans itself. During agitation, wash and rinse water passes over the filter, separating the lint from the water. The lint is then spun away from the filter and out of the system during the spin part of the cycle.

If your washer drains into a tub, remove any lint collected in the tub or strainer.

cycle

After agitation starts, the Cycle Control Knob turns clockwise until it points to an OFF area and the cycle ends.

The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

RINSE

Fill

Drain-No agitation

IT2!it-JSpin-Spray rinse

l&J Spin

Off

Inl

Page 9
Image 9
Whirlpool 3366859 warranty What happens in each, Self-cleaning lint filter, Cycle, Wash, Rinse