To change door panel color

Lift up at each

end of the trim piece

at bottom of door panel and then pull trim piece toward you. Set trim piece aside.

2.

Use both hands to bow door panel and remove panel from door.

desired color facing

out and insert into door trim. Slide top of panel and spacer under top edge of upper door trim.

Hold door panel and spacer up: Insert trim piece and push down until it snaps in place. Slide door panel down.

If the

dishwasher is not operating properly...

Check these points:

. Is the door closed tightly and latched securely?

l Has the cycle been set correctly to start the dishwasher?

l Is the water turned on?

l Has a house fuse blown?

l Has electrical power been interrupted?

Note: If the motor has stopped because of overload, it will

automatically reset itself within a few minutes. If after checking these points the dishwasher still does not run or complete a cycle, call for service.

Printed I” U S A

Page 5
Image 5
Whirlpool 3369088 installation instructions To change door panel color