Canceling a cycle
You can cancel a cycle at any time.
1. Turn the Cycle Control Knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
2.
Open the door.
3. Turn the Cycle Control Knob to OFF.
Selecting cycle options
You can select an option after the dish-
washer starts as long as the cycle has not
passed the point that the option is used. For
example, you can select ENERGY SAVER
DRY any time before the Cycle Control
Knob reaches DRY.
HEATED DRY option
If the HEATED DRY option is selected, air in
the dishwasher is heated during the “dry”
part of the cycle. For best results, use a
liquid rinse agent and select HEATED
DRY.
NOTE: For models with 7 buttons: Select
RESET OPTIONS if the ENERGY SAVER
DRY option was selected for the previous
cycle.
Models with
Rocker Switch Models with Models
3or5 with 7
buttons buttons
ENERGY SAVER DRY option
If the ENERGY SAVER DRY option is
selected, air in the dishwasher is not heated
during the dry part of the cycle. Using this
option helps save energy, but dishes take
longer to dry (overnight) and some water
spotting may result. Some items (such as
plastics) may need towel drying. For best
results, use a liquid rinse agent.
OR
Models with Models with
Rocker Switch buttons
LOW ENERGY WASHING
option
(on some models)
When the LOW ENERGY WASHING option
is selected, water heating is reduced during
the main wash and final rinse. This will
reduce the amount of electricity needed to
run the dishwasher. However, dishes may
not wash as well.
. i N 13