Whirlpool 3396315 manual Using rinse and spin, Using drain and spin, Soak cycle, Super Wash cycle

Soak cycle

The Soak cycle features brief periods of agi- tation and soak time to help remove heavy soils and stains that need pretreatment.

l Use warm water when soaking laundry. (Hot water can set stains.) See pages 22-24 for stain removal information.

l Use the amount of detergent or presoak additive recommended by manufacturer.

l After the 12-minute Soak cycle ends, add detergent and set a new wash cycle.

Using rinse and spin

When using extra detergent for heavily soiled clothes, or washing special-care items, you may want an extra rinse and spin.

1.Push in Cycle Control Knob and turn clockwise to Rinse, as illustrated.

2.Pull out Cycle Control Knob. The washer fills to selected load size, agitates, drains, and spins.

Using drain and spin

A drain and spin may help shorten drying times for some heavy fabrics or special-care items by removing excess water.

1.Push in Cycle Control Knob and turn clockwise to Spin, as illustrated.

2.Pull out Cycle Control Knob. The washer drains and then spins.

Super Wash cycle

The Super Wash cycle automatically pre- washes the laundry and advances into the Regular wash cycle. (The washer does not need to be reset after the Super Wash cycle.) Use this 14-minute cycle when washing heavily-soiled loads that need maximum soil removal.

0 For proper cleaning, use double the amount of detergent recommended for a wash cycle.

NQTE: The washer pauses between the Super Wash cycle and the Heavy part of the Regular wash cycle. This is normal.

11