Whirlpool 3950306 warranty Stopping/restarting your washer, Operating Your Washer

OPERATING YOUR WASHER

4.Turn the Load Size Selector to the setting that corresponds with the size of your wash load and the type of fabric being washed.

•See pages 12 and 13 for loading suggestions.

•To change the load size setting after the washer has started to fill, turn the Selector to the desired new setting.

5.Select a Wash-Rinse Temperature with the Water Temperature Selector. Match the water temperatures with the type of fabric and soils being washed.

•See page 14 for water temperature guidelines.

MEDIUM

SMALL LARGE

WATER

SAVER LOAD SIZE

WARM

COLD

COLD	HOT
COLD	COLD

WASHRINSE TEMPERATURE

6.Push in the Cycle Control Knob and

turn it clockwise to the wash cycle you want. See pages 7 to 9.

7.Pull out the Cycle Control Knob to

start the washer.

8.(OPTIONAL STEP) Add measured liquid fabric softener to the final rinse water. See page 10.

Stopping/restarting your washer

•To stop the washer at any time, push in the Cycle Control Knob.

•To restart the washer, close the lid (if open) and pull out the Cycle Control Knob.

6