INSTALLATION REQUIREMENTS
Tools andParts
Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water inlet hoses:
■ Pliers that open to 1⁹⁄₁₆" | ■ Flashlight (optional) |
(3.95 cm) |
|
Parts supplied:
ABC
A. Drain hose form
B. Water inlet hoses (2)
C. Flat water inlet hose washers (4)
Tools needed for securing the drain hose and leveling the washer:
■ | Adjustable or open end | ■ | Wood block |
| wrench ⁹⁄₁₆" (14 mm) | ■ | Ruler or measuring tape |
| Level | ||
■ |
|
|
Parts supplied:
AB
A. Beaded tie strap
B. Front leveling feet with nuts (2)
Alternate Parts
Your installation may require additional parts. For ordering information, please refer to the toll free phone numbers on the front page of your “Washer User Instructions.”
If You Have: | You Will Need to Buy: |
|
|
Laundry tub or | Sump pump system (if not already |
standpipe taller | available) |
than 96" (2.4 m) |
|
|
|
1" (2.5 cm) | 2" (5 cm) diameter to 1" (2.5 cm) |
diameter | diameter standpipe adapter, |
standpipe | Part Number 3363920 |
|
|
Overhead sewer | Standard 20 gal. (76 L) 39" (99 cm) tall |
| drain tub or utility sink, sump pump and |
| connectors (available from local |
| plumbing suppliers) |
|
|
Floor drain | Siphon break, Part Number 285320; |
| additional drain hose, |
| Part Number 3357090 and connector kit, |
| Part Number 285442 |
|
|
Water faucets | 2 longer water fill hoses: |
beyond reach of fill | 6 ft (1.8 m) Part Number 76314, |
hoses | 10 ft (3.0 m) Part Number 350008 |
|
|
Drain hose too | Drain hose, Part Number 388423 and |
short | hose kit, Part Number 285442 |
|
|
Drain hose that is | Hose kit, Part Number 285442 |
too long |
|
|
|
Lint clogged drain | Drain protector, Part Number 367031 |
|
|
2
