Dryer location

and dimensions

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches above the floor for a garage installation.

Failure to do so can result in death, explosion, or fire.

Product dimensions

 

 

A grounded electrical outlet is

Dimensions shown with

 

required within 4-1/2 feet for

 

the power supply cord.

11"

feet extended 1” from

 

bottom of dryer.

 

 

The dryer door extends 14" from the front of the dryer when fully opened.

14"

43-1/8"

38-1/4"

1-1/2"

gas line opening

6-1/4"

27-1/2"

27"

Exhaust dimensions

back exhaust

left or right side

bottom exhaust

 

exhaust

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4"

14-1/8"

4-1/4"

10-1/4"

7-1/4"

14-1/8"

For proper drying performance:

The location must provide:

Protection from weather and water: Do not store or use dryer where it will be exposed to water and weather.

Room temperature above 45°F: If room temperature is below 45°F, automatic cycles may not shut off.

Sturdy floor to support dryer weight of

120 pounds.

Level floor: Maximum slope under entire dryer should not be more than 1 inch. (If slope is greater than 1 inch, install Extended Dryer Feet Kit, Part No. 279810.) Clothes may not tumble properly and automatic sensor cycles may not operate correctly if dryer is not level.

It is your responsibility to:

Observe all governing codes and ordinances.

Check code requirements: Some codes limit or do not permit installation of clothes dryers in garages, closets, mobile homes or sleeping quarters. Contact your local building inspector.

Comply with the installation specifications and dimensions.

Consider spacing requirements for companion appliances.

Make sure you have everything necessary for proper installation.

Properly install dryer.

Contact a qualified installer to insure that the electrical and gas installations meet all national and local codes and ordinances.

Exhaust dryer to outdoors: Dryer must be exhausted outdoors to prevent exposure to harmful substances in the gas fuel.

This installation must conform with local codes, or in the absence of local codes with the National Fuel Gas Code ANSI Z223.1/NFPA 54 installation codes.

Copies of the standards listed may be obtained from:

*CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

Recessed area/closet installation

Installation clearances

Use recommended clearance for easier installation.

Recommended/Minimum

Recessed area installation

Closet/confined area installation

If a closet door is installed: The minimum unobstructed air openings are required. Louvered doors with equivalent air openings are acceptable.

 

Back

Sides

Top

Front

Recessed

5"/0"

1"/0"

18"/18"

Closet

5"/4"

1"/0"

18"/18"

1"/1"

 

 

 

 

 

No other fuel burning appliance may be installed in the same closet or recessed area.

• If codes permit, dryer may be installed in a

recessed area or closet using dimensions shown.

• Dimensions are in inches and are the minimum

allowable. Detailed space requirements can also

be found on the label on the back panel of the

dryer. These requirements ensure minimum

clearances to combustible construction, and

prevent blockage of air into the combustion

chamber.

19"

0"**0"**

**Wall, door and floor molding may require additional spacing.

front view 3"

48

sq. in.***

24 sq. in.***

3"

1"

side view

14"

max.

4"****

• Additional spacing should be considered for ease

of installation and servicing. Companion

appliance spacing should also be considered.

***Minimum top and bottom air openings for closet door.

****External exhaust elbow requires additional space.

Panel A

Page 2
Image 2
Whirlpool 3978909 Dryer location Dimensions, Product dimensions, Exhaust dimensions, Recessed area/closet installation

3978909 specifications

The Whirlpool 3978909 is a highly acclaimed dryer heating element designed specifically for several models of Whirlpool dryers. This essential component plays a crucial role in drying clothes efficiently and effectively, ensuring users can enjoy optimal performance from their laundry appliances.

One of the main features of the Whirlpool 3978909 is its compatibility with a wide range of dryer models. This versatility makes it an ideal choice for homeowners looking to replace the heating element in older units or those experiencing heating issues in newer machines. The element is engineered to provide consistent heat output, which is pivotal for achieving the best drying results.

In terms of technology, the Whirlpool 3978909 utilizes high-quality materials designed to withstand high temperatures and extended use. This durability ensures that the heating element can last for many cycles without the need for frequent replacement. It is built to deliver efficient heating, reducing energy consumption while effectively drying clothes. The element heats up quickly, allowing for shorter drying times and improved appliance efficiency, which is a significant benefit for users looking to save time and energy costs.

The 3978909 model is also designed with user-friendliness in mind. Installation is straightforward, making it accessible even for those with limited DIY experience. The element typically comes with all necessary connectors and specifications for an easy replacement process, which can usually be done in under one hour.

Another characteristic that sets the Whirlpool 3978909 apart is its commitment to safety. The heating element is designed with various safety features to prevent overheating and other potential hazards, providing peace of mind for users. It operates quietly and efficiently, minimizing noise during operation while maximizing performance.

In summary, the Whirlpool 3978909 dryer heating element is a reliable and efficient component that enhances the drying capabilities of Whirlpool dryers. With its compatibility, durable design, user-friendly installation, and focus on safety, this heating element is an excellent investment for anyone looking to maintain their laundry appliances in peak condition. Whether replacing an old element or upgrading for better performance, the Whirlpool 3978909 stands out as a top choice among dryer heating solutions.