Whirlpool 6ED20PK Before Using Your Rebigerator, Cleaning it, Plugging it in, Installing it

Models: 6ED20PK 3ED20PK

1 20
Download 20 pages 17.38 Kb
Page 5
Image 5
Before Using Your

Before Using Your

Rebigerator

In This

 

Section

Page

 

 

Page

 

 

 

 

 

Cleaning

it

.....................................................

...... 5

Installing

it

........................... 5

Plugging

it

in

...... 5

Leveling

it

,.............. ... ...... 6

It is important to prepare your refrigerator for use. This section will tell you how to clean it, Connect it to a power source, install it and level it.

Cleaning it

Clean your refrigerator before using it, if neces- sary. See cleaning instructions on page 13.

Plugging it in

Recommended Grounding Method

A 220 or 240 Volt, 50 Hz., AC only 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.

Installing it

1.Allow 1.25 cm (‘/2 inch) space on each side and at the top of the refrigerator for ease of installation.

2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.

3.The refrigerator can be flush against the wall.

Page 5
Image 5
Whirlpool 6ED20PK, 3ED20PK Before Using Your Rebigerator, Cleaning it, Plugging it in, Installing it, In This, Section