Odors
■Have you recently been painting, staining or varnishing in the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone from the area,
■If the dryer is electric, is it being used for the first time? The new electric heating element may have an odor. The odor will be gone after the first cycle.
■If the dryer is gas, there may be a gas leak.
Turn off the gas supply line, leave your house, and then call your local gas company.
Garment damage
■Check the following:
Were zippers, snaps, and hooks left open?
Were strings and sashes tied to prevent tangling? Were care label instructions followed?
Were items damaged before drying?
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check “Troubleshooting.” If you still need help, follow the instructions below.
If you need replacement parts
If you need to order replacement parts, we recommend that you only use FSP® factory specified parts. These parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL® appliance. To locate FSP replacement parts in your area, call the dealer from whom you purchased the dryer or a Whirlpool designated service company.
NOTE: For gas dryers only, if the power supply cord is damaged, it must be replaced by a special cord available from the dealer from whom you purchased the dryer or a Whirlpool designated service company.
For warranty information
Contact the dealer from whom you purchased your dryer.
12
