Using
your Dryer
1. Put the sorted load in the dryer and close the door tightly.
2.Turn the Cycle Control Knob to the cycle you want.
lUse LIGHT for small loads of Ilght- weight fabrics. The LIGHT Cycle runs for the least time Use LIGHT also to damp dry loads for Ironing
l Use MED for normal size loads of light or medium weight fabrics [sheets, piI-
lowcases, shirts. etc )
lUse HEAVY for normal size loads of
heavy fabrics [towels, jeans. corduroys)
lUse EX HEAVY for large loads or for
heavv bulky Items (quilts, spreads, blan- kets, etc )
SUGGESTION:
You con set the Cycle Control Knob
anywhere past, between or below
the EX HEAVY and LIGHT settings For the first few loads
lSet the pointer In the mlddle of the load setting
l If the load IS drier than you want, set it to the right [for less time) the next time
l If the load IS not as dry as you want, set it to the left [for more time) the next time
For example:
lUse PERMANENT PRESS for a longer
period of
l If laundry IS left in the dryer after it has stopped tumbling, use the Tumble
Press Control setting (page 6) to help remove the wrinkles
3.Set TEMPERATURE SELECTOR.
lTurn the TEMPERATURE SELECTOR to
the drying temperature needed for the load See page 5 for suggested settings
4. Push the Start Button.
lMake sure the door IS closed and Cycle Control IS set If the door IS opened during the cycle. the dryer WI/I stop To restart the dryer, close the door and push the Start Button
5.To stop the dryer: l Open the door
l Or, turn the Cycle Control Knob to one of the OFF positions
l To change the setting while the dryer is running, turn the Cycle Control Knob, either way, so it points to the set- ting you want
NOTE: The Cycle Control Knob
should point to OFF when the dryer is not being used.
IMPORTANT To help reduce wren- kllng, take the load from the dryer as soon as tumbling stops This IS very
Important for permanent press, knits
