Installation procedure
1.Remove the front panel. Remove tape (if any). Lift panel and take it off the cabinet.
2.Remove the shipping brackets (2). Remove the cabinet ground screw (1) and disconnect the green and yellow grounding wire.
3. Slide the chassis out of the cabinet.
5.Install the drain plug and drain cup (accessory parts) to rear of cabinet. Slide drain cup down into rear support between grooves in cup.
NOTE: Attach drain plug and drain cup assemblies and attach hose before sliding unit into cabinet.
3. Remove the rear shipping screws (2).
PlW
Install drain cup
\Screws
6.Fix the cabinet to the support frame.
18
