Whirlpool 3PACH21DD0 Modifying the temperature, Modifying the fan speed, Fan Speed, 0AIR SWING

Modifying the temperature

Although the AUTO COOL Cycle has an initial factory-preset cooling temperature, you may decide the room is too cool or too warm. When you change the temperature from the factory-preset, the air conditioner uses fuzzy logic (computerized “learning”) to remember your preferences. Over time, the unit “learns” exactly what conditions make you most comfortable.

To modify the temperature:

l Press the WARMER Button to raise the

temperature of the outgoing air./\ WARMER

l Press the COOLER Button to lower the temperature of the incoming air.

NOTE: Each press alters the temperature approximately 1“C.

Modifying the fan speed

Although the AUTO COOL Cycle automati- cally chooses the proper fan speed to cool the room, you may desire to increase or decrease the amount of air blowing into the room.

To modify the fan speed:

l Press the FAN SPEED Button.0

FAN SPEED

NOTE: Each press of the FAN SPEED Button advances the fan speed through the cycle:

HI-,MED+LOW+HI

Using the AIR SWING feature

The AIR SWING feature tells your air conditioner to move the air output louvers side-to-side and swing the cooled air through the room.

To activate the AIR SWING feature: l Press the AIR SWING Button.

To deactivate the AIR SWING feature: l Press the AIR SWING Button again.

0AIR SWING

7