Connecting a Portable Dishwasher
NOTE: A special adapter must be installed on the faucet before the dishwasher can be connected. Complete instructions and the adapter are packed with your dishwasher.
When moving your dishwasher make sure the door is latched. Hold the dishwasher at the top front corners.
Connecting the dishwasher
1.Run water at faucet until it is hot. Turn water off.
2.Pull hoses out of their storage compart- ment on the back of the dishwasher. NOTE: Make sure the hoses are not kinked or twisted. Kinked hoses reduce washing performance.
3. | Pull down on the locking collar while | a |
| lifting the hose connector onto the faucet |
|
| adapter. |
|
4. | When the connector snaps into place, |
|
| release the locking collar. |
|
5. | Turn the hot water on slowly until it is |
|
| all the way on. |
|
6. | Plug in power supply cord. |
|
7. | See page 6 for instructions on how to |
|
| start the dishwasher. |
|
Locking collar
/
‘Hose connection
Drawing water when connected
You can draw water from the faucet while the dishwasher is connected. Do not draw water while the dishwasher is filling or while water is being pumped out. (This helps prevent a low fill when dishwasher is filling or mixing drain water with fresh water.)
dishwasher is
lPress the red button on the hose connec- tor to draw water from faucet. (The faucet is set on hot. Adjust faucet for the water temperature you want.)
NOTE: Turn hot water back on after you draw water from faucet. Turn off cold water.
16
