Whirlpool 4ED25DQ important safety instructions Installing it properly, Leveling it

Models: 4ED25DQ

1 24
Download 24 pages 11.31 Kb
Page 6
Image 6
Installing it properly

Installing it properly

1.Allow 1.25 cm (% inch) space on each side and at the top of the refrigerator for ease of installation.

2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.

3.The refrigerator can be flush against the wall.

4.Make sure ice maker water supply has been connected. Refer to Installation Instructions.

Leveling it

Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below.

1.Remove base grille. (See page 16.)

2.To raise front, turn screw clockwise.

3.To lower front, turn screw counterclock- wise.

4.Check with level.

5.Replace base grille. (See page 16.)

 

Right

to

raise;

AI

left

to

lower

Use

a screwdriver

6

Page 6
Image 6
Whirlpool 4ED25DQ important safety instructions Installing it properly, Leveling it