Whirlpool 6ET18ZK If You Need Assistance Or Service, Before calling for assistance

Models: 6ET18ZK

1 19
Download 19 pages 54.79 Kb
Page 17
Image 17
If You Need Assistance

If You Need Assistance

Or Service

This section is designed to help you save the cost of a service call. First we outline possible problems, their causes and their solutions. However, you may still need assistance or service. When calling an authorized WhirlpoolSM service company for help or calling for service, you will need to provide a complete description of the problem, your appliance’s complete model and serial numbers and the purchase date. (See page 2.) This information is needed to respond to your request properly.

1. Before calling for assistance . . .

Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.

PROBLEM

Your refrigerator will not operate

Unfamiliar sounds or a rattling/jingling noise

There is water in the defrost pan

The lights do not work

POSSIBLE CAUSE

The power supply cord is not plugged into a live circuit with proper voltage.

A household fuse has blown or circuit breaker tripped.

The Refrigerator Control is not set correctly.

There is something on top of or behind the refrigerator.

The sounds are normal.

This is normal in hot, muggy weather. The pan may even be half full.

A household fuse has blown or circuit breaker tripped.

The power supply cord is not plugged into a live circuit with proper voltage.

The bulb is burned out.

SOLUTION

Firmly plug power cord into a live circuit with proper voltage. (See page 5.)

Replace household fuse or reset circuit breaker.

Set Refrigerator Control to a numbered setting. (See page 7.)

Remove item from on top of or behind the refrigerator.

New features on your new refrigerator make new sounds. (See “Understanding the sounds you may hear” on page 12.)

Make sure the refrigerator is level so the pan does not overflow.

Replace household fuse or reset circuit breaker.

Firmly plug power cord into a live circuit with proper voltage. (See page 5.)

Replace bulb. (See page 11.)

The motor seems to run too much

The condenser coils are dirty. It is hot outside or in the room.

Thedoorhasbeenopened frequently.

A large amount of food has been put in at one time.

Clean the coils (See page 14.)

On hot days, or if the room is too warm, the motor naturally runs longer.

Open the door as few times as possible.

The motor will run longer in order to cool down the interior when food is added.

17

Page 17
Image 17
Whirlpool 6ET18ZK important safety instructions If You Need Assistance Or Service, Before calling for assistance