3.Select cycle and wash time Start the washer
lPush in the Cycle Control Knob and turn it clockwise.
lStop when the indicator on the knob’s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time.
l
l
Start the washer by pulling out the Cycle Control Knob. The washer will fill to the selected water level with the selected wash water temperature. The washer will begin agitating immediately after filling. Agitation can occur with the washer lid up or down.
To stop the washer at any time, push in the Cycle Control Knob. To restart the washer, pull out the Cycle Control Knob.
Whathappensin eachcycle
Each cycle has been designed for different kinds of fabrics.
When the Cycle Control Knob is set to a number and pulled out, the washer fills before agitation and timing starts.
After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends.
The washer will pause briefly throughout each cycle. These pauses are normal for washer operation.
Gentle Wash System
For better fabnc care in the REGULAR and PERMANENT PRESS Cycles, the agitation speed is reduced during the last few minutes of wash agitation time.
5
