1. ADJUSTMENT PROCEDURES

To avoid possible exposure to microwave energy leakage, adjust the door latches and interlock switches, using the following procedure.

ONLY AUTHORIZED SERVICE PERSONNEL SHOULD MAKE THIS ADJUSTMENT.

The Interlock Monitor and Primary Interlock Switch acts as the final safety switch protecting the user from microwave energy. The terminals between “COM” and “NC” of the Interlock Monitor must close when the door is opened. After adjusting the Interlock Monitor Switch, make sure that it is correctly connected. See Figures 1-a and 1-b throughout this procedure.

CHECK THE DOOR LATCH AND SWITCH

CLOSING.

NOTE: The outer cover of the microwave oven is removed.

(1)Set the microwave oven on its side so that you can see the latch board and the switches, as shown in

Figure 1-a.

(2)Close the door tightly and check gaps A and B to be sure they are no more than 1/64” (0.5 mm). See Figure 1-b for close-up view of gaps A and B (door latches).

If all gaps are less than 1/64” (0.5 mm), adjustment of the latch board may not be necessary. Go to Steps 5 and 6 to check the sequence of the switches.

NOTE: To correct sequence of the Primary Interlock Switch, Secondary Interlock Switch and the Interlock Monitor Switch is very important.

If any gap is larger than 1/64” (0.5 mm), you will need to adjust the latch board-U, L. Go to step 3 and follow all steps in order.

ADJUST THE LATCH AND SWITCH CLOSING

(3)Loosen the two screws holding the plastic latch board as shown.

(4)With the oven door closed tightly, move the latch board upward toward the top of the oven and/or away from the door latch until the gaps are less than 1/64” (0.5 mm).

Hold the latch board tightly in this position until you check the sequence of the switches in steps 5 and 6.

TEST THE LATCH AND SWITCH SEQUENCE

(5)Open the oven door slowly. Watch the door latch, the Primary Switch. Release Rod and Lever on the switches to make sure they are zero to the body of the switches in the following sequence:

-Primary Interlock Switch

-Secondary Interlock Switch

-Interlock Monitor Switch

Adjust the latch board until the switches operate in this sequence. See Steps 3 and 4.

(6)Close the oven door slowly and be sure it is tightly closed. Watch the three switches to make sure they are zero to the body of the switches in the following sequence:

-Interlock Monitor Switch

-Primary Interlock Switch

-Secondary Interlock Switch

NOTE: The Interlock Monitor Switch is an added safety check on the Primary and Secondary Interlock Switches. If the Primary and Secondary Interlock Switches allow the oven to operate with the door open, the Monitor Switch will blow the fuse.

(7)When you achieve the proper sequence of switches in Steps 5 and 6, tighten the latch board screws at that point.

TEST THE MICROWAVE ENERGY LEAKAGE

(8)Using a survey meter, make sure the microwave energy is below 5 mW/cm.sq.

-3-

Page 3 Page 5
Page 4
Image 4
Whirlpool 721.663398 Adjustment Procedures, Check the Door Latch and Switch Closing, Adjust the Latch and Switch Closing
Page 3 Page 5

721.663398 specifications

The Whirlpool 721.663398 is a versatile refrigerator designed to meet the demands of modern households while providing exceptional performance and energy efficiency. With its sleek design and innovative features, this model stands out in the realm of home appliances, offering both style and functionality.

One of the standout features of the Whirlpool 721.663398 is its spacious interior, which provides ample room for storing groceries and other food items. The refrigerator is designed with adjustable shelves that can be easily configured to accommodate various types of food and beverages, making it a practical choice for families of all sizes. Additionally, the inclusion of door bins adds to the organization, allowing for easy access to smaller items like condiments and snacks.

The refrigerator utilizes advanced cooling technology to maintain optimal temperature levels, ensuring that food remains fresh for longer periods. The adaptive cooling system responds dynamically to fluctuations in temperature, providing consistent cooling performance. This technology not only preserves food quality but also enhances energy efficiency, helping homeowners save on utility bills.

Another impressive characteristic of the Whirlpool 721.663398 is its energy-efficient design. This model is ENERGY STAR certified, meaning it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Homeowners can enjoy peace of mind knowing that they are reducing their environmental footprint while benefiting from lower energy costs.

In terms of convenience, the Whirlpool 721.663398 features a modern ice maker that provides on-demand ice production, perfect for hosting gatherings or simply keeping drinks cool during hot summer days. The exterior water dispenser offers easy access to clean and filtered water, promoting hydration without the need for bottled alternatives.

The refrigerator is also designed with a user-friendly digital control panel that allows for easy temperature adjustments and settings. This intuitive interface makes managing the appliance straightforward, even for those who might not be tech-savvy.

Overall, the Whirlpool 721.663398 combines style, functionality, and energy efficiency into one cohesive appliance. Its spacious interior, advanced cooling technology, and convenient features make it an excellent choice for those seeking a reliable refrigerator that caters to the needs of modern living. Whether you're stocking up for a large family or hosting social gatherings, this refrigerator is well-equipped to handle it all.
Top Page Image Contents