
CHECKING YOUR VENT
Your dryer must be properly installed and vented to achieve maximum drying efficiency and shorten drying times. Use the minimum recommended installation clearances (found in your Installation Instructions) to avoid blocking the flow of combustion and ventilation air. Install your dryer in a
VENTING
wWARNING
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death or fire.
If the dryer is not properly installed and vented, it will not be covered under the warranty.
NOTE: Service calls caused by improper venting will be paid for by the customer, whether it was a paid installation or
1.Do not use plastic vent or flexible metal foil vent. Use
Do not kink or crush flexible metal vent. It must be completely extended to allow adequate exhaust air
to flow. Check vent
4”after installation. Refer to your Installation Instructions for proper
length requirements of vent.
2.Use a
4”
4”
6