Before you start...

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.This symbol alerts you to hazards that can kill

or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER” or “WARNING”. These words mean:

DANGER

You will be killed or seriously injured if you don’t follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

To eliminate the risk of burns by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches (12.7 cm) beyond the bottom of the cabinets.

Important: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or electrical shock.

Proper installation is your responsibility.

Make sure you have everything necessary for correct installation.

Have a qualified technician install this cooktop.

Comply with the electrical specifications on the model/serial rating plate. Model/serial rating plate is located on the bottom of the cooktop. Write both numbers down on the front cover now before installing cooktop.

Downdraft cooktop location should be away from strong draft areas, such as windows, doors and strong heating vents or fans. Locate cooktop for convenient use in kitchen.

Grounded electrical system is required. See “Electrical requirements,” Page 6.

Venting system must terminate

outdoors.

All openings in the wall or floor where cooktop is to be installed must be sealed.

It is the customer’s responsibility to contact a qualified electrical installer, to make sure that the electrical installation is correct, and to make sure the electrical installation follows the National Electrical Code, ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 - latest edition**, and all local codes and ordinances.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

WARNING: To reduce the risk of fire, use only metal ductwork.

This downdraft cooktop is Not approved for use in mobile homes.

Copies of the standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park

Quincy, Massachusetts 02269

**CSA International

8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

Tools and materials needed for installation:

Parts supplied:

Phillips

 

screwdriver

 

 

metal

 

snips

 

hand or

caulking gun with

electric drill

weatherproof caulking

 

tape measure

duct tape

safety pliers glasses

gloves

Not shown:

wall or roof cap (not supplied)

metal vent

twist-on connector and 1/2" UL- or CSA-listed conduit connector. Number and size will depend on your installation. See “Electrical connection,” Pages 6-8.

literature pack

vent cover

glass cleaner

2

Page 2
Image 2
Whirlpool 8285116 Before you start, Parts supplied, Your safety and the safety of others is very important

8285116 specifications

Whirlpool 8285116 is a premium refrigerator water filter designed to improve the quality of drinking water and ice produced by compatible refrigerators. With its advanced filtration technology, the filter is capable of removing contaminants, such as chlorine, lead, and other impurities, ensuring that you enjoy fresh-tasting water and ice.

One of the most notable features of the Whirlpool 8285116 is its NSF certification. This certification assures consumers that the filter meets rigorous standards for contaminant removal and overall performance. The filter is designed to reduce more than 99% of harmful substances, making it an essential accessory for health-conscious consumers.

Another significant aspect of the Whirlpool 8285116 is its easy installation process. Users can replace the filter without the need for additional tools. The quick-change design allows for a straightforward swap-out, making it convenient for anyone to maintain their refrigerator’s water filtration system. This ease of use extends the longevity of the filter, as regular replacements ensure optimal performance.

The Whirlpool 8285116 operates utilizing a carbon block filtration media. This technology is effective in reducing bad tastes and odors commonly associated with tap water. The carbon absorbs impurities, while the design also minimizes the potential for bacteria growth within the filter.

In terms of compatibility, the Whirlpool 8285116 is designed to fit a wide range of Whirlpool, KitchenAid, and Maytag refrigerators. Always ensure compatibility with your specific refrigerator model for optimal performance.

The filter should be replaced approximately every six months, depending on usage, water quality, and frequency of use. Regular replacement is crucial to ensure that the filtration system remains effective, providing clean water and ice for your family.

In summary, the Whirlpool 8285116 water filter offers a combination of reliability, performance, and ease of use. With its NSF certification, advanced carbon block technology, and user-friendly installation process, it stands out as an excellent choice for consumers looking to enhance their refrigerator's water quality. By investing in this filter, you can enjoy the benefits of clean, fresh water and ice, ensuring that your family's hydration needs are met with the highest standards in water purification.