Electrical Connection
WARNING
Electrical Shock Hazard
Electrical earthing is required on this dryer.
Do not earth to a gas pipe.
Do not change the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.
Do not have a fuse in the neutral or earthing circuit.
Do not use an extension cord with this dryer.
Check with a qualified electrician to be sure the dryer is properly earthed.
Do not connect plug end of power supply cord into a live receptacle before connecting power supply cord to dryer terminal block.
Do not reuse old power supply cord.
Failure to follow these instructions could result in death, fire, or serious injury.
Plug supply cord into an earthed outlet. It should be connected to an electricity supply socket at the voltage shown on the rating plate. The minimum supply fuse capacity should be 16A. The dryer must be positioned so that the plug is accessible. If the fitted plug is not used, the electrical connection must be carried out by a competent electrician in accordance with local or national codes.
If the supply cord is damaged, it must be replaced with a specially terminated cord by an authorized service agent or a similarly competent person.
Do not use an adapter.
Do not use an extension cord.
Important: Observe all governing codes and ordinances.
If codes permit and an additional earth bond wire is used, it is recommended that a competent electrician determine that the earth bond path is adequate.
8
