Changing the control
lf you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 23.)
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDITION:
lf Refrigerator Section is
TOO WARM
lf Freezer Section is
TOO WARM
REASON:
Door opened often
Large amount of food added Room temoerature too warm
Door opened often
Large amount of food added Very cold room temperature (can’t cycle often enough)
RECOMMENDED CONTROL SElllNGS:
Refrigerator
Freezeri
Refrigerator 3
FreezerC
lf Refrigerator | Controls | not set correctly | Refrigerator | 2 |
Section is | for your | conditions | Freezer | B |
TOO COLD |
|
|
|
|
If ICE isn’t
MADE FAST ENOUGH
ffBOTH SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature (can’t cycle often enough)
Door opened often
Large amount of food added Very warm or very cold room temperatures
Refrigerator
Freezer:
Refrigerator
Freezeri
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
To remove shelves:
1.Remove items from shelf.
2.Tilt shetf up at front.
3.Lift shelf up at back.
4.Pull shelf straight out.
To replace shelves:
1.Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slots.
3.Lower front of shelf to level position.
NOTE: The above instructions apply to all models in this manual (ED20PK with glass shelves and ED20ZK and ED22ZR with wire shelves).
Model EDSOPK: Gfa66 shelver are heavy. Be careful.
8
