1.Disconnectpowersupplytothe dishwasher.
2.Turnoffwatersupplytothedishwasher.
3.Removethe4 screwsonthelower
accesspanelandremovethelower accesspanel.
4.Placeashallowpanunderthewater supplyvalve.Then,useawrenchto disconnectthewaterinletfromthewater supplyvalve.Separatethewaterinlet fromthewatersupplyvalveanddrain waterintothepan.
5.Removethespringclampfromthewater outletandseparatefromthewater supplyvalve;drainwaterintopan.
6.Reconnectbothwaterinletandwater outlettothewatersupplyvalve.
7.Emptythepanandreposition under thewaterpump.
8.Removetheclampanddisconnectthe drainhosefromthewaterpump;drain waterintopan.
9.Reconnectdrainhosetothewater
pump,beingsuretopositiontheclamp
overtheconnection.
10.Replacetheloweraccesspanel.
NOTE:Ifyourdishwasherconnectedto
agarbagedisposal,donotrunwaterinto
thesinkafterwinterizingThiscouldcause. waterto refillthedrainhoseonyour dishwasher.
Reconnecting your dishwasher
1.Remove the 4 screws on the lower access panel and remove lower access panel.
2.Turn on the water supply to dishwasher.
3.Turn on power supply to dishwasher.
4.Run dishwasher through a complete cycle and check for leaks.
5.Replace lower access panel.
Storing for the summer
Protect your dishwasher during the summer months by turning off the water supply and power supply to the dishwasher.
Figure 1
Water outlet Spring clamp Water pump and motor
Water supply | Water | Drain |
valve | inlet | hose |
Figure 2
outlet Spring clamp Water pump and motor
Water supply Water
valveinlet
23
