Starting a wash cycle

1.Load the dishwasher. See the "Loading Your Dishwasher" section.

2.Spin the spray arms. They should

turn freely.

5. Close door firmly until it latches.

6.Run hot water at the sink nearest the dishwasher until water is hot.

3.Add detergent. See the "Using the

Dispensers" section.

4. Add rinse agent, if needed.

Turn water off.

7. Press a Cycle pad. If desired, press one

"Setting the Controls" section. The dishwasher starts filling

I[_°roncem°reyouOpti°npress pads"cycleSeepadthe unless you select the delay

wash cycle. You may press Option pads as the machine is filling.

The pad indicator glows red when a cycle or an option is selected.

Stopping the dishwasher

You can stop your dishwasher anytime during a cycle. All you have to do is:

Open the door slightly. Wait for any filling or spraying action to stop before opening the door all the way. Close door to continue cycle.

OR

Press Cancel/Drain. Once pressed, a

2-minute drain starts. See the "Setting the Controls" section.

Page 6
Image 6
Whirlpool 920 warranty Starting a wash cycle, Stopping the dishwasher